Toyota Performance Parts

>> Click Here To Increase Your Toyota's Performance

• Get the maximum performance from your Toyota Tacoma with the ultimate Unichip performance chip. 
• The Plug 'n Play kit that comes pre-mapped to optimize your bolt-on accessories
• Add's up to 27hp & 26ft-lb .
• Easily plugs into the stock ECU & ECU harness in minutes , no programming necessary .
• Installs in minutes , ready to roll!.

Why should you use a Unichip Performance Chip?

1. Performance - The control you need to make 100% of the available power from your vehicles engine.
2. Versatility - Compared with similar products, the Unichip is a universal tuning solution with which a tuner can easily control timing, fueling, as well as (if applicable) turbo boost, nitrous, water injection etc on just about any modern vehicle with an ECU (engine computer). These popular manufactures such as Chevy, Mercedes, Toyota, Dodge, etc... diesel-powered, rotary, Otto-cycle it doesn't matter.  An individual use the the exact same tuning software as well as the same hardware (Unichip)to program and control all vehicle manufactures.
3. Control - Add nitrous, water injection, additional fuel injectors, road speed via CAN Bus systems (if applicable) to most applications and control them through the Unichip software for smooth engine operation along with minimal driver tasks.  Auto switch between maps with different calibrations when needed.
4. Adaptability - Integrate turbocharger/supercharger systems seamlessly by utilizing the Unichip to provide real time timing and fueling changes based on 5 different inputs such as air flow, throttle position, boost, Air to Fuel ratio, injector on time, or any available duty, frequecny or voltage input. 
5. Simplicity - Not just engine power but power over the engine for the tuner.

Unichip Main Features

• Fits piggy-back style to existing electronic fuel injection systems & puts engine control back into the hands of the tuner .Renders an otherwise untuneable Engine Management System , tuneable to the extent of what Standalone systems provide & even beyond that.
• No opening of ECU's or burning of chips.
• Supports just about every modern crank style . Updateable firmware means that as new crank styles are released by manufacturers the Unichip is easily upgraded to stay in touch with technology
• The Unichip has 5 map sets available . Every chip can therefore be tuned with up to 5 completely different maps . For example :  Map1 can be used for regular fuel ; Map 2 for a 50/50 mix of Gasoline & an Alternative Fuel ; Map3 for  100% Alternative Fuel  etc.
• Switching between maps is accomplished in 3 different ways : easiest & simplest way is via a 5-way switch (available from Unichip) which can be installed inside the car . Then there's a Bluetooth switch (available from Unichip) which communicates with most modern cellphones . Our most popular map switching method is via our Flux Power display .
• Manipulate 3(Unichip Q) to 5(Unichip Q+) 0-5volt inputs.
• Drive extra fuel injectors 
• Drive water injection
• Drive water/methanol injection and much more....