2012 Jeep Wrangler JK 3.6L

  • The Plug 'n Play kit that comes pre-mapped to optimize your bolt-on accessories
  • Installs in minutes , ready to roll!

Flux and tell us about your Vehicle

Tell us which bolt-on's you currently have on your ride. If your bolt on combination doesn't appear in the drop-down box, select “stock”, then mention what you have in the comments box during final checkout.

*Required Field

Stock = The vehicle has no aftermarket engine modifications

CAI = Cold Air Intake

Cat/B = Cat back Exhaust System

Headers = Exhaust Header Pipes

Clear

$465.00

SKU: N/A Categories: ,
  • Fits Left Hand Drive Jeep JK models 2012 – 2013, 3.6 liter V6
Weight 4.5 lbs
Dimensions 15 × 10 × 2 in
Vehicle Modifications

Stock, AFE CAI, AFE CAI, Cat/B, AFE CAI, All Headers, Cat/B, AirRaid CAI, AirRaid CAI, All Cat/B, AirRaid CAI, All Headers, All Cat/B, All Cat/B, All Drop In Filters, All Drop In Filters, All Cat/B, All Drop In Filters, All Headers, All Cat/B, Banks CAI, Banks CAI, All Cat/B, Banks CAI, All Headers, All Cat/B, K&N FIPK, K&N FIPK, All Cat/B, K&N FIPK, All Headers, All Cat/B, Volant CAI, Volant CAI, All Cat/B, Volant CAI, All Headers, All Cat/B

Features

  • Add’s up to 18hp & 16ft-lb .
  • Easily plugs to the stock engine sensors in minutes, no programming necessary .
  • Realizes the full potential of Aftermarket add-on’s like Cold-Air-Intakes & exhaust systems with each kit comes pre-mapped for the exact set-up of your Jeep.
  • No end-user tuning necessary, just plug the kit into the car and you’re ready to go.
  • Easily internet-upgradeable for future add-on’s.
  • Each kit comes with two maps: a low-octane performance map and a premium-octane performance map, switchable from within the vehicle. 5-Maps available with Flux2: Low-octane, Mid-grade octane, Premium-octane, Premium-octane no tow, Valet.
  • Plug ‘n Play harnesses are fully Flux2 capable – purchase Flux2 when you purchase the Plug ‘n Play kit or upgrade later – Flux2 simply plugs into the Unichip & the OBD port inside the vehicle.
  • Plug ‘n Play kits are removed from the vehicle in minutes , returning the vehicle to stock tuning , without leaving a footprint of ever having been modified (a feature which reflash-tuning cannot match). The kit can then be used on a different vehicle. If the new vehicle has different bolt -on parts the kit can be reflashed to suit the new parts.

NEW FEATURES

  • Jeep tire size & gear ratio correction now possible with Flux2 for all ’07-> JK models. Ask for Jeep Firmware in the comments section of our shopping cart when ordering.

Dyno Sheets

Dyno Results 2012-2013 models

Click on the dyno sheet for larger view or to print.

Jeep 3.6 liter Dyno Sheet 2012

Instructions

Installation Instructions for 3.6L Jeep JK

See The Difference

“Very clear, easy to follow instructions. Finally a worthwhile programmer for the 2012 JK, all I can say is WOW! Got my Flux2 display mounted in the glove box, ala ‘stealth mode’, ready for when I need it. This thing’s mine now, you won’t pry it from my cold dead hands!” Jason, CA.

 

 

“Took me 25 minutes to install, piece of cake. Just what my Jeep needed. I will add the Flux2 display soon & download some new maps when I install the Intake”  Moh.

 

 

 

“Plug ‘n Play? Install it myself? Multiple maps? Doesn’t affect warranty? A Display to match? WHERE HAVE YOU BEEN ALL MY LIFE!!!” Archie.

 

 

“Beware fellow Jeepers, there’s wannabe trinkets out there! The Unichip is the most powerful tuning solution out there for our JK’s, don’t buy lesser junk, you will be disappointed!” Anthony.

 

Couldn’t wait any longer for the reflash guys to get their act together so I installed this. Definitely feel the power. Nice all round quality kit. I will get the display next month” Mike.

Reviews

There are no reviews yet.

Be the first to review “2012 Jeep Wrangler JK 3.6L”
Make Model Year
Jeep Wrangler JK 2012
Scroll to Top